Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~500V, 0~10A, 350W)

Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~500V, 0~10A, 350W)
2.040,00 € *
Inhalt: 1 Stück

zzgl. MwSt. zzgl. Versandkosten

Der Artikel ist verfügbar.

  • GW-PEL-2041A
Downloads
Model GW Instek: GW-PEL-2041A Electronic Load Module - DC - Programmable - Single Channel... mehr
Produktinformationen "Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~500V, 0~10A, 350W)"

Model GW Instek: GW-PEL-2041A
Electronic Load Module - DC - Programmable - Single Channel Module, (0~500V, 0~10A, 350W)


● Sequence function to do high Efficient load simulations
● Flexible configuration with mainframes and plug-in modules
● Multiple independent load inputs up to 8 channels in a mainframe
● Parallel connection of inputs for increased load capacity
● Parallel connection of inputs for static and dynamic tests
● Multiple channels run for dynamic tests under one clock control
● Maximum rated power for low range high resolution CC tests
● Von setting and Von on/off for start-up Von tests
● Program mode to create work routines for repetitive tests
● OPP/OCP/OVP/OTP protections
● External channel control/monitoring via an analog control connector
● Multi-Interface USB Device / Host, RS-232C, and GPIB (Optional)
● Multi-mainframe link up to 5 mainframes in a System

The PEL-2004 and PEL-2002 are multiple channel, programmable DC electronic loads with a modularized structure. The PEL-2000 Series is designed to meet the continuing shift toward high speed operation in today's semiconductor market. As the power supply units, DC-DC converters, and batteries that drive semiconductor circuits to follow this shift, power supply design, quality inspection, and characteristic certification using high-speed performance loads have become necessary. The PEL-2000 Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004 is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002 is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004 is configured with 4 load modules rated at 350W each, the PEL-2000 series is able to sink up to 1.4kVA of power.

For higher load capacities, mainframes can be linked together in parallel with standard MIL 20-pin connectors. A maximum of 5 mainframes, including one master and 4 slaves can be chained together to create a total load capacity of 7kW for high current and high power applications. Using 4 dual channel load modules, the PEL-2004 is able to test 8 power supply outputs simultaneously. The Sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step. Each sequence is able to run concurrently under the control of one clock. This is one of the most powerful features of the PEL-2000 Series as it is able to realistically simulate a multi-output power supply load. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a pre-defined speed up to 25 s per step. This is often used as the standard test procedure to verify the response of a power supply to quick load changes. Most remarkably, multiple load channels can be connected in parallel to run Dynamic tests synchronously under a single clock. This Parallel Dynamic functionality gives the flexibility to perform dynamic tests for a high-power power supply without the need of another high-power load.

●Scope of Delivery:
   GW Instek GW-PEL-2000A Module Unit
   GTL-120: Test Lead 1x
   GTL-121: Sense Lead 1x

● Optional Accessories (not included):
   PEL-001: GPIB Card
   PEL-002: PEL-2000A Series Rack Mount Kit
   PEL-003: Panel Cover
   GTL-251: GPIB-USB-HS(High Speed)
   GTL-248: GPIB Cable (2m)
   GTL-249: Frame Link Cable
   GTL-246: USB Cable, USB 2.0 A-B TYPE CABLE, 4P
   GTL-232: RS-232C Cable, 9-pin, F-F Type, null modem, 2m

Weiterführende Links zu "Elektronische Last - Programmierbar - Einschubmodul - 1 Kanal - (0~500V, 0~10A, 350W)"
6GHz Multi Standard RF Signal Generator, 1Hz-1MHz AM/FM/PM 6GHz Multi Standard RF Signal Generator,...
Saluki Technology
SK-S1132B

Preis auf Anfrage
MAGNALOAD ALx Serie MAGNALOAD ALx Serie
Magna-Power Electronics, Inc.
MPE-ALx-Serie

Preis auf Anfrage
Programmierbares DC Labornetzteil | 212 W Programmierbares DC Labornetzteil | 212 W
GW Instek (Good Will Instruments)
GW-GPP-4323

Inhalt 1 Stück
560,00 € *
Programmierbares DC Labornetzteil | 217 W Programmierbares DC Labornetzteil | 217 W
GW Instek (Good Will Instruments)
GW-GPP-3323

Inhalt 1 Stück
540,00 € *
PL-GPIB-LAN GPIB to Ethernet Converter PL-GPIB-LAN GPIB to Ethernet Converter
Prologix
PL-GPIB-LAN

Inhalt 1 Stück
199,00 € *
USB Logikanalysator für PC - 500 MHz - 34 Kanäle USB Logikanalysator für PC - 500 MHz - 34 Kanäle
Intronix
IX-LA1034

Inhalt 1 Stück
425,00 € *
Acute AE-TS2212B TravelScope: USB Digital-Oszilloskop - 200 MHz - 2 Kanäle - 1 GS/s - USB - 128 k/Ka Acute AE-TS2212B TravelScope: USB...
Acute Technology Inc.
AE-TS2212B

Inhalt 1 Stück
860,00 € *
GW Instek: GW-PEL-3111: Elektronische Last - Programmierbar - DC - 1050W - 1.5...150V - 0...210A GW Instek: GW-PEL-3111: Elektronische Last -...
GW Instek (Good Will Instruments)
GW-PEL-3111

Inhalt 1 Stück
3.826,00 € *
Programmierbares DC Labornetzteil | 63 W Programmierbares DC Labornetzteil | 63 W
GW Instek (Good Will Instruments)
GW-PPH-1503D

Inhalt 1 Stück
2.249,00 € *
Dual Range DC Labornetzteil | 375 W, 3 Kanal Dual Range DC Labornetzteil | 375 W, 3 Kanal
GW Instek (Good Will Instruments)
GW-SPD-3606

Inhalt 1 Stück
665,00 € *
DC Labornetzteil | 360 W, 12 V, 30 A DC Labornetzteil | 360 W, 12 V, 30 A
GW Instek (Good Will Instruments)
GW-SPS-1230

Inhalt 1 Stück
409,00 € *
Zuletzt angesehen