Model Marvin Test Solutions: MV-GC2210
225 MHz Measurement Time Interval Counter PCI Card
- 13 measurement functions
- DC to 225 MHz
- Fast measurement mode: 200 readings / second
- External reference clock & arming inputs
- Gate signal output
- Self-calibration feature ensures highest accuracy
- Software selectable input impedence (1 MOhm or 50 Ohm) and coupling (AC or DC) for each input channel
The Marvin Test MV-GC2210 PCI universal time interval counter offers many of the measurement and timing functions of high-end stand-alone frequency counters, including accumulate, auto ratio, frequency, period, ratio, single period, test clock, time interval, time interval delay, totalize, totalize gated, totalize gated once, & pulse width. The MV-GTX2210 frequency range operates to 225 MHz. The card is also available in PXI format (GTX2210).
The MV-GC2210 counter has two signal input channels via BNC connectors, an external timebase input, arm input, and a gate signal output. The separate input signals can be used for arming and gating the circuitry, and controlling the timing of the analysis (start / stop duration) for maximum measurement flexibilty.
The MV-GC2210 counter uses an on-board microprocessor with embedded firmware to off-load processing tasks from the main CPU. The counters use high-density, low-power field programmable gate arrays (FPGA) to perform complex logic tasks. Reciprocal counting techniques are used to achieve high resolution measurements on lower frequency signals without sacrificing measurement time. These techniques provide a fixed number of digits of resolution for all frequencies rather than a fixed resolution in Hz for the same gate time.
Additionally, the counter includes an on-board 10 MHz TCXO timebase for internal frequency reference. An external 10 MHz input is also availble for use with external timebases.
Scope of Delivery:
- Marvin Test Solutions MV-GC2210: Time Interval Counter PCI Card
- Certificate of Calibration