Programmable DC Power Supply | 1000W

€1,158.00 *
Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

  • AM-SP40VDC1000W
Available downloads:
Model APM Technologies: AM-SP40VDC1000W Power Supply - DC - Programmable - Switching -... more
Product information "Programmable DC Power Supply | 1000W"

Model APM Technologies: AM-SP40VDC1000W
Power Supply - DC - Programmable - Switching - High-Precision - 40V - 40A - 1000W

  • Channels 1
  • Power 1000W
  • Power Factor >0.98
  • Input Power 750VA (MAX) 1300VA (MAX) 1500VA (MAX)
  • Output Voltage Range 0-40V
  • Output Current Range 0-40A
  • Voltage Load Regulation 10mV
  • Current Load Regulation 40mA
  • Voltage Setting Accuracy 0.05%+15mV
  • Current Setting Accuracy 0.1%+40mA
  • Voltage Measurement Accuracy 0.05%+15mV
  • Current Measurement Accuracy 0.1%+40mA
  • Voltage Ripple 40mVp-p/6mVrms
  • Current Ripple 60mA (Full Range)
  • Current Ripple 20mA (TYP value)
  • Voltage Temperature Coefficient[2] 100ppm/„ƒ
  • Current Temperature Coefficient[2] 150ppm/„ƒ
  • DVM Resolution 0.1mV
  • DVM Accuracy 0.05%+15mV
  • Remote Compensation 4V MAX
  • Load Transient Response Time ‰¤2ms
  • Command Response Time 50ms
  • Efficiency (Full Load) 82.5% 83% 84%
  • Protection Function OVP/OCP/OTP/OPP/SCP

The APM Technologies AM-SP40VDC1000W programmable source has an operating efficiency of up to 84%. By a special measure in the circuit design of the switching architecture potential damage inflicted on the device itself is reduced. As a result, the overall efficiency is increased while lowering the rate of temperature rise of the DC source. Compared with other similar types of products in the market, APM Technologies' sources offer significant advantages. The unique fast drop function makes the response of the AM-SP40VDC1000W much superior.

The APM Technologies AM-SP40VDC1000W has a built-in digital voltmeter (DVM) and this independent function can measure the value of the output voltage at the output terminal, and display the value at VFD screen by switching over the front panel buttons. The DC source can also be used as external equipment for laboratory testing, to measure voltage values. In the master-slave control mode, up to 4 units of APM units can be used in either a series or parallel mode. This control mode has the effect of €œa hundred responses to a (single) call€. Once the mode is settled, the €œSlave€ will be locked in the main interface and exclusively controlled by the €œMaster€. When there is a €œSlave€ signaling a protection mode issue, all the DC sources will turn off and exit master-slave mode.

When users require high output power, APM Technologies AM-SP40VDC1000W source can increase the output power by using up to 10 devices in a series or parallel mode. AM-SP40VDC1000W source via its RS485 interface can be operated in a series mode by using up to 31 units of the device, thus makes it possible to simultaneously control all the DC sources connected on RS485 from a PC.

Scope of Delivery:

  • APM Technologies AM-SP40VDC1000W Power Supply
  • Power Cord

 

AC / DC: DC
Output Channels: 1
Voltage (V): 40 V
Power (W): 1000 W
Current (A): 40 A
Regulations Operating Modes: CV - constant voltage, CC - constant current, CP - constant power
Interfaces: GPIB (Opt.), LAN, RS232 / Serial, RS485, USB
Related links to "Programmable DC Power Supply | 1000W"
Linked 3-Phase AC System - 3000W Linked 3-Phase AC System - 3000W
APM Technologies
AM-SPS300VAC3000W

Price on request.
Linked 3-Phase AC System - 1800W Linked 3-Phase AC System - 1800W
APM Technologies
AM-SPS300VAC1800W

Price on request.
MAGNA XR Series MAGNA XR Series
Magna-Power Electronics, Inc.
MPE-XR-Serie

Price on request.
Programmable DC Power Supply | 360 W Programmable DC Power Supply | 360 W
Maynuo
MN-M8851

Content 1 piece(s)
€916.00 *
Programmable DC Power Supply | 2000W Programmable DC Power Supply | 2000W
APM Technologies
AM-SP80VDC2000W

Content 1 piece(s)
€1,549.00 *
Viewed