€1,613.70 * €1,793.00 * (10% Saved)
Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

  • GW-PEL-2030A
Available downloads:
Model GW Instek: GW-PEL-2030A DC Electronic Load Module - Programmable - Dual Channel -... more
Product information "GW-PEL-2030A"

Model GW Instek: GW-PEL-2030A
DC Electronic Load Module - Programmable - Dual Channel - (1~80V, 0~5A, 30W) + (1~80V, 0~40A, 250W)

• Sequence function to do high Efficient load simulations
• Flexible configuration with mainframes and plug-in modules
• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• Multiple channels run for dynamic tests under one clock control
• Maximum rated power for low range high resolution CC tests
• Von setting and Von on/off for start-up Von tests
• Program mode to create work routines for repetitive tests
• OPP/OCP/OVP/OTP protections
• External channel control/monitoring via an analog control connector
• Multi-Interface USB Device / Host, RS-232C, and GPIB (Optional)
• Multi-mainframe link up to 5 mainframes in a System

The PEL-2004 and PEL-2002 are multiple channel, programmable DC electronic loads with a modularized structure. The PEL-2000 Series is designed to meet the continuing shift toward high speed operation in today's semiconductor market. As the power supply units, DC-DC converters, and batteries that drive semiconductor circuits to follow this shift, power supply design, quality inspection, and characteristic certification using high-speed performance loads have become necessary. The PEL-2000 Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly reduces the investment needed for future projects that have different power requirements. The PEL-2004 is a 4-slot mainframe with a master control unit to hold 4 load modules, while PEL-2002 is a 2-slot mainframe with master control unit to hold 2 load modules. When the PEL-2004 is configured with 4 load modules rated at 350W each, the PEL-2000 series is able to sink up to 1.4kVA of power.

For higher load capacities, mainframes can be linked together in parallel with standard MIL 20-pin connectors. A maximum of 5 mainframes, including one master and 4 slaves can be chained together to create a total load capacity of 7kW for high current and high power applications. Using 4 dual channel load modules, the PEL-2004 is able to test 8 power supply outputs simultaneously. The Sequence function allows each channel to change its load sink according to a predefined sequence at a rate of up to 100 s per step. Each sequence is able to run concurrently under the control of one clock. This is one of the most powerful features of the PEL-2000 Series as it is able to realistically simulate a multi-output power supply load. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a pre-defined speed up to 25 s per step. This is often used as the standard test procedure to verify the response of a power supply to quick load changes. Most remarkably, multiple load channels can be connected in parallel to run Dynamic tests synchronously under a single clock. This Parallel Dynamic functionality gives the flexibility to perform dynamic tests for a high-power power supply without the need of another high-power load.

•Scope of Delivery:
   GW Instek GW-PEL-2000A Module Unit
   GTL-120: Test Lead 1x
   GTL-121: Sense Lead 1x

• Optional Accessories (not included):
   PEL-001: GPIB Card
   PEL-002: PEL-2000A Series Rack Mount Kit
   PEL-003: Panel Cover
   GTL-251: GPIB-USB-HS(High Speed)
   GTL-248: GPIB Cable (2m)
   GTL-249: Frame Link Cable
   GTL-246: USB Cable, USB 2.0 A-B TYPE CABLE, 4P
   GTL-232: RS-232C Cable, 9-pin, F-F Type, null modem, 2m

Related links to "GW-PEL-2030A"