For professionals (EU countries) | All data subject to change
Give us a call: +49(0)7032 / 895 93-3

Multimeters & Test Devices

We offer multimeters with different performance ranges, designs and functionalities for various measurements - whether handheld or tabletop. Furthermore, you will find an extensive range of safety testers of various test devices for high voltage, ground bond or to test leakage current. The top class of our products here are the test enclosures. Electrical safety testing - we know our stuff!
Further products in this category are optical instruments and other trackers for analyses in the laboratory or in production.

We offer multimeters with different performance ranges, designs and functionalities for various measurements - whether handheld or tabletop. Furthermore, you will find an extensive range of... read more »
Close window
Multimeters & Test Devices

We offer multimeters with different performance ranges, designs and functionalities for various measurements - whether handheld or tabletop. Furthermore, you will find an extensive range of safety testers of various test devices for high voltage, ground bond or to test leakage current. The top class of our products here are the test enclosures. Electrical safety testing - we know our stuff!
Further products in this category are optical instruments and other trackers for analyses in the laboratory or in production.

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
1 From 7
No results were found for the filter!
GWInstek GPT-9800-Serie | View: front right Hipot, Electrical Safety Tester 200 VA |...
GW Instek (Good Will Instruments)
GW-GPT-9800-Serie

High voltage tester AC, to 5 kV, 200 VA, 100 setup memory, R232C, USB
Content 1 piece(s)
From €1,077.00 *
GWInstek GPT-9901 | View: front right Hipot, Electrical Safety Tester 500 VA |...
GW Instek (Good Will Instruments)
GW-GPT-9900-Serie

High voltage tester AC, to 5 kV, 500 VA, 100 setup memory, R232C, USB
Price on request
GWInstek GPT-9600 Series | View: front right Hipot Tester.100 VA | GPT-9600 Series
GW Instek (Good Will Instruments)
GW-GPT-9600-Serie

Hipot, AC dielectric strength, 100 VA, Remote Terminal
Price on request
GWInstek GPT12001 - View: front Hipot Safety Analyzer, 200 VA | GPT-12000 Series
GW Instek (Good Will Instruments)
GW-GPT-12000-Serie

Safety Annalyzer, AC, DC, IR, GB, 200 VA, RS-232C, USB, Signal I/O
Content 1 piece(s)
From €1,581.00 *
GWInstek GPT-15001 - View: front right Hipot Safety Analyzer, 500 VA | GPT-15000 Series
GW Instek (Good Will Instruments)
GW-GPT-15000-Serie

500 VA AC test capacity, AC stability, earth continuity
Price on request
ITECH IT5102 - View: front Battery Tester | IT5100 Series
ITECH
IH-IT5100-Serie

Voltage: up to ±1000 V, Accuracy resistance: 0.4%+0.05%FS / 0.4%+0.1%FS (3 mΩ-Range)
Price on request
BRS Messtechnik Measuring cable MK-K Measuring Cable MK-K
BRS Messtechnik
BR-MK-K

Measuring cable (1 m) with two big Kelvin clamps for internal resistance measurements on larger batteries
€138.00 *
Connection Cable VK-BMUX Connection Cable VK-BMUX
BRS Messtechnik
BR-VK-BMUX

Connection cable between the measuring devices BIM1B, BIM2B and the Battery-Multiplexer BMUX15/4
€27.00 *
BRS Messtechnik Measuring cable MK-O Measuring Cable MK-O
BRS Messtechnik
BR-MK-O

Measuring cable (0.8 m) with open ends for connecting individual contacts
€48.00 *
BRS Messtechnik Measuring cable MK-L-Set Measuring Cable MK-L-Set
BRS Messtechnik
BR-MK-L-Set

Measuring cable MK-L inclusive four alligator clips and four cable lug adapters for M4 / M6 / M8
€87.00 *
BRS Messmodul Universal measuring cable MK-L Universal measuring cable MK-L
BRS Messtechnik
BR-MK-L

Universal measuring cable (1 m) with four laboratory plugs (4 mm) for internal resistance and impedance measurements
€76.00 *
BRS Messtechnik High Voltage Measuring Cable MK-HV High Voltage Measuring cable MK-HV
BRS Messtechnik
BR-MK-HV

High Voltage Measuring Cable (1 m) with 2 pairs of twisted test leads and 4 mm safety plugs for internal resistance and...
€75.00 *
1 From 7

Anyone who wants to perform a quick and accurate measurement of the typical measured variables such as voltage, current, resistance or frequency, reaches for a portable handheld multimeter from, for example, the brand GW Instek (Good Will Instruments). These are extremely inexpensive in different measurement classes with 250 V, 600 V or 1000 V to acquire in the LXinstruments store.

If you have higher requirements, you can directly choose a DMM, which can be used in the laboratory as a bench-top setup with flying wiring, but can also be permanently installed in a test rack. In this case, the side carrying handle and the protective rubber coating can be removed without much effort in order to mount the GW Instek device flush in the system on the rails.

The devices differ also among other things by the fact whether the connection of the channels is in front at the front or later invisibly in the back of the device. If the digital multimeter is to be used in an automatic test sequence, then the devices offer a wide variety of connection options:

  •     USB
  •     RS-232C
  •     GPIB
  •     LAN

Through the color displays and the self-explanatory buttons, all measurements can also be configured manually directly and easily read through the results by the large font.

Safety tester

If the legally regulated safety test must be carried out on a product, then this always includes a high voltage test. This can be easily performed with the devices from GW Insekt (Good Will Instruments) available in the LXinstruments store. The safety tests differ otherwise in the divisions:


With the additional installation of a matrix, the high-voltage channels can be expanded to the required number by multiplexing. The currently switched path is shown on the device display.

While a test is in progress and the DUT (device under test) is supplied with voltages that are dangerous to humans, it must be shielded so that it is safe to touch. For this purpose, LXinstruments has developed a test enclosure in which the DUT can be inserted and contacted. The hood can then simply be closed. The measuring instruments are installed in the test rack underneath the hood and the cables are led upwards so that they are safe to touch. By means of exchangeable interchangeable sets, a test hood can be used for a wide variety of products and contacting types. A traffic light on the side indicates the test result to the user in color.

Optical instruments

Due to the expansion of the Internet, equipment for testing and processing fiber optic components is increasingly required. For this purpose we recommend the instruments from Saluki Technology, which are differentiated in:

  •     Splicing of optical fibers (up to 6 motors) or
  •     Measuring of the splice (for example reflectometer or time domain measurements)

Test equipment

Complete automatic test systems for measuring unassembled PCB (Printed Circuit Board) or assembled PCA PCB (Printed Circuit Assembly) we offer with the Huntron measuring probe systems. These are available with one or two probes.

Viewed