Programmable DC laboratory power supply | 63 W

€2,249.00 *
Content: 1 piece(s)

Prices plus VAT plus shipping costs

The article is available.

  • GW-PPH-1503D
Available downloads:
Model GW Instek: GW-PPH-1503D Power Supply - DC- Programmable - Switching - High Precision - 2... more
Product information "Programmable DC laboratory power supply | 63 W"

Model GW Instek: GW-PPH-1503D
Power Supply - DC- Programmable - Switching - High Precision - 2 Channels - (0~15V/0~3A)(0~12V/0~1.5A) or (0~9V/0~5A)(NA) - (45W/18W)

  • Dual Channel DC Power Output
  • Ch1: 45W (0~15V/0~3A or 0~9V/0~5A)
  • Ch2: 18W (0~12V/0~1.5A)
  • 3.5 inch TFT LCD Display
  • Built-in DVM Measurement Function
  • High Measurement Resolution (1mV/0.1μA for 5mA Range)
  • Current Sink Function (Maximum : 3.5A)
  • Pulse Current Measurement
  • Long Integration Current Measurement
  • Sequence Function (Sequential power output)
  • Built-in Battery Simulation Function
  • OVP, OCP, OTP & Temperature Display for Heat Sink
  • Support USB (Device& Host)/GPIB/LAN
  • 5 Groups of Save/Recall Setting
  • External RELAY Control

GW Instek introduces new GW-PPH-1503D programmable high precision dual-channel DC power supply. GW-PPH-1503D€™s CH1 provides dual operational ranges for voltage and current and its total power output is 45W. The dual operational ranges are 0 to 15V/0 to 3A or 0 to 9V/0 to 5A. CH2 provides 0 to 12V/0 to 1.5A with 18W power output.

GW-PPH-1503D€™s high precision measurement capability achieves the maximum resolution of 1mV/0.1uA and the smallest pulse current width of 33us that satisfy customers€™ measurement application requirements of high resolution and pulse current. Fast load current variation will result in voltage sag for general power supplies that will have an impact on DUT€™s internal circuit operation. GW-PPH-1503D is equipped with the excellent transient recovery time, which can, in less than 40us, recover the output voltage to within 100mV of the previous voltage output when the current level changes from 10% to 100% of the full scale. Furthermore, conventional power supplies do not have sufficient response speed to promptly respond to set voltage value once the set voltage is changed. GW-PPH-1503D has a rise time of 0.2ms and a fall time of 0.3ms, which are 100 times faster than that of conventional power supplies. Therefore, GW-PPH-1503D can provide DUT with a stable output voltage even when DUT is operating under large transient current output. The internal high-speed sampling circuit design of GW-PPH-1503D, with the sample rate of 64K, can conduct pulse current measurement without using a current probe and oscilloscope. The current read back accuracy is 0.2%+1uA (equals to 11uA) at 5mA range, and the read back resolution is 0.1uA that allow DUT to be measured with a high accuracy level. Unlike battery, general power supplies, which do not have the characteristics of fast transient recovery time, can not maintain a stable power supply for cellular phone, wireless device, and wearable device which produce large transient pulse current load for hundreds of μs to dozens of ms when in use. GW-PPH-1503D, different from general power supplies, has the characteristics of fast transient recovery time. While simulating battery to output pulse current, GW-PPH-1503D can quickly compensate the voltage drop caused by pulse current. CH1 has the built-in battery simulation function, which can define output impedance settings so as to accurately simulate battery€™s impedance characteristics during battery discharge. Fast transient recovery time and built-in battery simulation function together facilitate GW-PPH-1503D to accurately simulate battery€™s real behavior pattern so as to conduct product tests.

GW-PPH-1503D is not only suitable for simulating battery, charger and supplying power to DUT, but also ideal for simulating an electronic load to conduct discharge tests with its sink current capability. The sink current function allows GW-PPH-1503D to simulate a voltage source with the sink current capability. The maximum sink current of GW-PPH-1503D€™s CH1 is 3.5A and for CH2 is 2A. Long integration current measurement can be utilized to conduct average current measurement for periodical pulse current in a long period of time that is applied to analyze power consumption for a period of time. One of the applications is to measure the average power consumption of a cellular phone in use so as to conduct the internal RF module parameter analysis. The maximum current measurement range of CH1 is 5A and for CH2 is 1.5A. The built-in sequence function of CH1 provides users with 1000 steps to edit sequential outputs, including voltage, current and execution time. The built-in DVM function of CH2 has a voltage range from 0 to +20VDC that saves users the cost of purchasing an additional voltage meter.

GW-PPH-1503D provides OTP function and shows heat sink temperature on the upper right corner of the display screen. Other than that, features such as five sets of system setting values for the SAVE/RECALL function, 10 sets of Power On Setup Settings, Key-Lock function to prevent unauthorized inputs, temperature-controlled fan to reduce noise, hardcopy to save screen information, and external relay control device together augment GW-PPH-1503D€™s usability. GW-PPH-1503D supports test requirements of Profile1, Profile2 and Profile3 from USB Power Delivery(PD) constructed by USB-IF association.

Scope of Delivery:

  • GW Instek GW-PPH-1503D Base Unit
  • Power Cord
  • Quick Start Manual
  • User Manual CD
  • GTL-117: Test Lead 10A Maximum 1x
  • GTL-204A: Test Lead 10A Maximum 1x
  • GTL-203A: Test Lead 3A Maximum 1x

Optional Accessories (not included):

  • GTL-246: USB Cable
AC / DC: DC
Output Channels: 2
Voltage (V): 15 V
Power (W): 45 W
Current (A): 5 A
Regulations Operating Modes: CV - constant voltage, CC - constant current
Interfaces: GPIB, LAN, USB
Related links to "Programmable DC laboratory power supply | 63 W"
Programmable DC laboratory power supply | 81 W Programmable DC laboratory power supply | 81 W
GW Instek (Good Will Instruments)
GW-PPH-1506D

Content 1 piece(s)
€0.01 *
Programmable DC laboratory power supply | 212 W Programmable DC laboratory power supply | 212 W
GW Instek (Good Will Instruments)
GW-GPP-4323

Content 1 piece(s)
€560.00 *
Programmable DC laboratory power supply | 217 W Programmable DC laboratory power supply | 217 W
GW Instek (Good Will Instruments)
GW-GPP-3323

Content 1 piece(s)
€540.00 *
Linked 3-Phase AC System - 1800W Linked 3-Phase AC System - 1800W
APM Technologies
AM-SPS300VAC1800W

Price on request.
Programmable DC laboratory power supply | 81 W Programmable DC laboratory power supply | 81 W
GW Instek (Good Will Instruments)
GW-PPH-1506D

Content 1 piece(s)
€0.01 *
High Power DC Power Supplies  6kW to 36kW High Power DC Power Supplies 6kW to 36kW
APM Technologies
AM-SP-Serie

Price on request.
Programmable DC laboratory power supply | 720 W Programmable DC laboratory power supply | 720 W
GW Instek (Good Will Instruments)
GW-PSW160-14.4

Content 1 piece(s)
€1,140.00 *
Programmable DC laboratory power supply | 1560 W Programmable DC laboratory power supply | 1560 W
GW Instek (Good Will Instruments)
GW-PSU600-2.6

Content 1 piece(s)
€1,799.00 *
Programmable DC laboratory power supply | 50 V, LAN Programmable DC laboratory power supply | 50 V,...
GW Instek (Good Will Instruments)
GW-PFR-100LGP

Content 1 piece(s)
€699.00 *
PT-P9611A PT-P9611A
Picotest
PT-P9611A

Content 1 piece(s)
€255.00 *
MN-M8874 MN-M8874
Maynuo
MN-M8874

Content 1 piece(s)
€1,957.00 *
IX-LA1034 USB Logic Analyzer IX-LA1034 USB Logic Analyzer
Intronix
IX-LA1034

Content 1 piece(s)
€425.00 *
AM-SP75VDC600W Power Supply AM-SP75VDC600W Power Supply
APM Technologies
AM-SP75VDC600W

Content 1 piece(s)
€1,035.00 *
AE-TS2212H AE-TS2212H
Acute Technology Inc.
AE-TS2212H

Content 1 piece(s)
€1,160.00 *
Linear AC laboratory power supply | 1000 VA Linear AC laboratory power supply | 1000 VA
GW Instek (Good Will Instruments)
GW-APS-7100E

Content 1 piece(s)
€2,199.00 *
Programmable AC laboratory power supply | 500 VA Programmable AC laboratory power supply | 500 VA
GW Instek (Good Will Instruments)
GW-APS-7050

Content 1 piece(s)
€2,155.00 *
GW-GDS-2302A GW-GDS-2302A
GW Instek (Good Will Instruments)
GW-GDS-2302A

Content 1 piece(s)
€1,575.20 * €1,969.00 *
GW-MSO-2204EA GW-MSO-2204EA
GW Instek (Good Will Instruments)
GW-MSO-2204EA

Content 1 piece(s)
€1,447.20 * €1,809.00 *
GW-MDO-2204EX Mixed Domain Oscilloscope GW-MDO-2204EX Mixed Domain Oscilloscope
GW Instek (Good Will Instruments)
GW-MDO-2204EX

Content 1 piece(s)
€1,396.00 * €1,745.00 *
Programmable DC laboratory power supply | 45 W Programmable DC laboratory power supply | 45 W
GW Instek (Good Will Instruments)
GW-PPH-1503

Content 1 piece(s)
€1,436.00 *
GW-GDS-2204E GW-GDS-2204E
GW Instek (Good Will Instruments)
GW-GDS-2204E

Content 1 piece(s)
€1,032.00 * €1,290.00 *
Linear DC laboratory power supply | 180 W, 18 V, 10 A Linear DC laboratory power supply | 180 W, 18...
GW Instek (Good Will Instruments)
GW-GPR-1810HD

Content 1 piece(s)
€304.00 *
Programmable DC laboratory power supply | 200 W Programmable DC laboratory power supply | 200 W
GW Instek (Good Will Instruments)
GW-PSP-2010

Content 1 piece(s)
€266.00 *
Linear DC laboratory power supply | 90 W, 30 V, 3 A Linear DC laboratory power supply | 90 W, 30 V,...
GW Instek (Good Will Instruments)
GW-GPS-3030D

Content 1 piece(s)
€131.20 * €164.00 *
Viewed